811247.jpg

10 Micron Carbon Pleated Cartridge Filter 20" Std

$119.90

The 10 Micron Carbon Pleated Cartridge Filter – 20" Standard (Std) is a dual-layer pleated water filter cartridge designed for standard 20" Standard (Std) Big Blue filter housings. It combines mechanical sediment filtration with activated carbon treatment to reduce chlorine, improve taste and odour, and remove medium-sized suspended particles while maintaining strong water flow. Ideal for whole house, rainwater, bore water, and light commercial filtration systems.

The 10 Micron Carbon Pleated Cartridge Filter – 20" Standard (Std) is a dual-layer pleated water filter cartridge designed for standard 20" Standard (Std) Big Blue filter housings. It combines mechanical sediment filtration with activated carbon treatment to reduce chlorine, improve taste and odour, and remove medium-sized suspended particles while maintaining strong water flow. Ideal for whole house, rainwater, bore water, and light commercial filtration systems.

    • 10 micron nominal filtration

    • Dual-layer activated carbon and pleated polyester media

    • Fits standard 20" Standard (Std) Big Blue filter housings

    • Combines sediment filtration with carbon treatment

    • High dirt-holding capacity due to pleated design

    • High flow rate with low pressure drop

    • Reduces:

      • Dirt, sand, and sediment

      • Chlorine

      • Unpleasant taste and odour

      • Basic organic contaminants

    • Suitable for rainwater, bore water, and mains water systems

    • Designed for consistent flow and low maintenance

    • Whole house water filtration systems

    • Rainwater tank treatment

    • Bore water filtration

    • Mains water treatment

    • Pre- or post-filtration in multi-stage water filtration systems

    • Homes experiencing chlorine taste or odour issues

    • Light commercial water treatment systems

    • Micron Rating: 10 micron (nominal)

    • Size: 20" Standard (Std) Big Blue

    • Media: Activated carbon and pleated polyester

    • Filter Type: Carbon pleated cartridge

    • Brand: Atlas Filtri

    • Temperature Range: 4°C to 45°C

  • Typical replacement interval: Every 3–6 months (depending on water quality and usage).

    • Replace sooner if:

      • Water flow decreases noticeably.

      • Chlorine taste or odour returns.

      • The cartridge becomes heavily discoloured or clogged.

    • Activated carbon media cannot be restored by washing or rinsing. Replace the cartridge once its performance declines.

    Best Used With

    • A 20 micron or 5 micron sediment pre-filter to reduce heavy sediment loads and extend cartridge life.

    • As part of a multi-stage filtration system for improved water quality and longer service life.

    Not Suitable For

    • Bacteria or virus removal.

    • Ultra-fine sediment filtration below 5 microns.

    • Heavy sediment loads without a suitable pre-filter.

    • Dissolved chemical contaminants beyond the reduction capabilities of activated carbon.