810980.jpg

10 Micron Pleated Coarse Sediment Filter – 10" Big

$114.40

The 10 Micron Pleated Coarse Sediment Filter – 10" Big is a washable pleated sediment filter cartridge designed for standard 10" Big Blue filter housings. It provides mechanical filtration to remove fine suspended particles from water while maintaining high flow rates and low pressure drop. Ideal as a primary pre-filtration stage, it helps protect downstream filters, plumbing, appliances, and water treatment systems, extending the life of the overall filtration system.

The 10 Micron Pleated Coarse Sediment Filter – 10" Big is a washable pleated sediment filter cartridge designed for standard 10" Big Blue filter housings. It provides mechanical filtration to remove fine suspended particles from water while maintaining high flow rates and low pressure drop. Ideal as a primary pre-filtration stage, it helps protect downstream filters, plumbing, appliances, and water treatment systems, extending the life of the overall filtration system.

    • 10 micron nominal sediment filtration

    • Washable and reusable pleated design

    • Fits standard 10" Big Blue filter housings

    • Pleated polyester sediment media with large surface area

    • High flow rate with low pressure drop

    • Mechanical filtration only (no carbon media)

    • Removes:

      • Sand and grit

      • Rust and corrosion particles

      • Dirt and fine sediment

      • Silt and debris

    • Designed for whole house water filtration systems

    • Lower maintenance compared to standard depth sediment filters

    • Whole house sediment pre-filtration

    • Rainwater tank filtration systems

    • Bore and well water treatment

    • Pre-filtration before:

      • Carbon filtration systems

      • UV disinfection systems

    • Protection for plumbing, taps, pumps, and household appliances

    • Improves water clarity before finer filtration stages

    • Micron Rating: 10 micron (nominal)

    • Size: 10" Big Blue

    • Media: Pleated polyester sediment media

    • Filter Type: Washable pleated sediment cartridge

    • Function: Mechanical particle filtration only

    • Temperature Range: 4°C to 45°C

    • Typical maintenance interval: Every 3–6 months (depending on water quality).

    • Replace sooner if:

      • Water flow drops noticeably.

      • The cartridge becomes visibly clogged or discoloured.

      • Heavy sediment buildup remains after cleaning.

    • Although washable and reusable, filtration performance gradually declines over time and the cartridge should be replaced when cleaning no longer restores adequate flow.

    Best Used With

    • A 5 micron or finer sediment filter as a second-stage filter.

    • A carbon filter for chlorine, taste, and odour reduction.

    • A UV system where sediment removal is required before disinfection.

    Not Suitable For

    • Chlorine, taste, or odour removal (no carbon media).

    • Bacteria or virus filtration.

    • Dissolved chemical contaminants.

    • Ultra-fine filtration below 5 microns.cription

  • Generic Replacement for Puretec PL10MP1.