-
10 micron nominal sediment filtration
Washable and reusable pleated design
Fits standard 20" Big Blue filter housings
Pleated polyester sediment media with large surface area
High flow rate with low pressure drop
Mechanical filtration only (no carbon media)
Removes:
Sand and grit
Rust and corrosion particles
Dirt and fine sediment
Silt and organic debris
Suitable for domestic, commercial, and industrial water systems
Designed for consistent high-flow operation
-
Whole house sediment pre-filtration
Rainwater tank filtration systems
Bore and well water treatment
Pre-filtration before:
Carbon filtration systems
UV disinfection systems
Protection for plumbing, taps, pumps, and household appliances
Improves water clarity before finer filtration stages
-
Replacement
Typical maintenance interval: Every 3–6 months (depending on water quality).
Replace sooner if:
Water flow reduces noticeably.
The cartridge becomes visibly dirty or clogged.
Sediment buildup remains after rinsing.
Washing extends the usable life of the cartridge, but replacement is required once cleaning no longer restores adequate performance.
Best Used With
A 5 micron or finer sediment filter as a second-stage filter.
A carbon filter for chlorine, taste, and odour reduction.
A UV system where sediment removal is required before disinfection.
Not Suitable For
Chlorine, taste, or odour removal.
Bacteria or virus filtration.
Dissolved chemical contaminants.
Ultra-fine filtration below 5 microns.
-
Generic Replacement for Puretec PL10MP2