811435.jpg

25 Micron Pleated Sediment Filter 10" Std

$39.60

The 10" Standard 25 Micron Pleated Sediment Filter is designed to remove suspended solids, dirt, rust, sand, silt, and other particulate matter from water supplies. Manufactured using durable pleated polypropylene filter media, this cartridge provides a large filtration surface area, high dirt-holding capacity, and excellent flow performance for reliable sediment filtration.

The 10" Standard 25 Micron Pleated Sediment Filter is designed to remove suspended solids, dirt, rust, sand, silt, and other particulate matter from water supplies. Manufactured using durable pleated polypropylene filter media, this cartridge provides a large filtration surface area, high dirt-holding capacity, and excellent flow performance for reliable sediment filtration.

    • Premium pleated polypropylene filter media for effective sediment removal.

    • 25 micron filtration rating for medium to coarse particulate reduction.

    • High dirt-holding capacity for extended cartridge life.

    • Reduces sand, rust, dirt, silt, scale, and suspended solids.

    • Large surface area design provides high flow rates with low pressure drop.

    • Rigid pleated structure maintains filtration performance under pressure.

    • Standard 10" cartridge size.

    • Compatible with most standard 10" filter housings.

    • Helps protect pumps, valves, carbon filters, membranes, and other downstream equipment.

    • Whole-house water filtration systems.

    • Bore water and rainwater filtration.

    • Pre-filtration before finer sediment and carbon filters.

    • Commercial and industrial water filtration.

    • Irrigation and agricultural water systems.

    • Protection of pumps, valves, plumbing, and water treatment equipment.

    • General sediment removal applications.

    • Filter Type: Pleated Sediment Cartridge

    • Media: Pleated polypropylene

    • Size: 10" Standard (10" x 2.5")

    • Micron Rating: 25 micron

    • Function: Sediment, dirt, rust, sand, silt, and suspended solids reduction

    • Temperature Range: 4°C to 45°C

    • Maximum Operating Pressure: 125 psi (862 kPa)

    • Housing Compatibility: Standard 10" filter housings

  • Typical replacement interval: Every 6–12 months, depending on water quality, sediment levels, and water usage.

    Replace sooner if:

    • Water flow decreases noticeably.

    • Pressure drop increases across the filter.

    • The cartridge becomes heavily clogged or discoloured.

    • Sediment begins passing through the filtration system.

    • Filtration performance declines.

    Pleated polypropylene media may be rinsed and reused in some non-potable applications. Replace the cartridge when the media is damaged, permanently blocked, or no longer provides effective sediment reduction.

    Best Used With

    • A 50 micron sediment pre-filter for high sediment water sources to extend cartridge life.

    • Activated carbon filters for chlorine, taste, and odour reduction.

    • As part of a multi-stage filtration system for improved water quality and protection of downstream equipment.

    Not Suitable For

    • Fine sediment removal below the 25 micron rating.

    • Chlorine, taste, or odour reduction.

    • Bacteria or virus removal.

    • Water softening or hardness reduction.

    • Dissolved chemical contaminant removal.

    • Generic Replacement for Puretec PL201

    • Generic Replacement for Davey 20PP10