Better Water Filtration for Queensland Homes
Featured Products
3 Stage Whole House Chlorine Removal System (Atlas Filtri)
Clean, better-tasting water for your entire home, built for real-world conditions.
This 3 stage filtration system is designed to remove sediment and reduce chlorine, improving the taste, smell, and overall quality of your water throughout the house. It is a practical, high flow setup suited to mains water supplies, using proven Atlas Filtri components.
What’s Included
Atlas HYDRA BIG self-cleaning screen filter (90 micron) with flushing valve
20” BIG 10 micron pleated sediment cartridge
20” BIG 5 micron carbon block cartridge
DP Trio moulded head and housing system
Pressure gauges to monitor filter condition
Protective cover
How It Works (Simple Explanation)
This system uses three stages of filtration, and each one has a job.
Stage 1 – Self-Cleaning Hydra Filter (90 micron)
This is your first line of defence. It catches the bigger stuff such as sand, grit, and debris before it gets into the rest of the system. The key advantage is that it is washable, with a flushing valve at the base that allows you to clean it out without replacing anything. This helps protect the rest of the system and reduces ongoing costs.
Stage 2 – 10 Micron Pleated Sediment Filter
This stage removes finer particles such as rust, dirt, and organic debris including bark and leaves. By removing this material, it helps protect tapware and valves, reduces wear on household appliances, and improves overall water clarity.
Stage 3 – 5 Micron Carbon Block Filter
This is the most important and most expensive stage. It reduces chlorine, improving taste and smell, and makes water more pleasant for drinking and showering. It also provides a final level of fine filtration down to 5 microns.
Performance
Rated flow 26.6 L/min
Estimated capacity 209,000 litres (90 percent chlorine reduction at 2 ppm)
Why a 3 Stage System Matters
The goal is not just filtration, but protecting your filters and extending their life. By removing large and fine sediment in the first two stages, you prevent the carbon filter from clogging prematurely. This leads to better performance, longer lifespan, and lower running costs.
Running Costs (Realistic Expectations)
Cartridge replacement typically occurs every 6 to 12 months depending on water quality and maintenance.
Estimated cost of ownership
$35 dollars per month
$423 dollars per year
*Note on running costs
These figures are provided as a guide based on typical usage and maintenance. Actual replacement costs will vary depending on water quality, usage, and how well the system is maintained.
Replacement cartridges for this system are available in our store:
810982 – 10 micron pleated sediment cartridge
813173 – 5 micron carbon block cartridge
Most homes will sit closer to the lower end with proper maintenance.
Best For
Mains water homes
Reducing chlorine taste and smell
Protecting plumbing and appliances
Whole house filtration setups
The Bottom Line
This is a practical, no fuss filtration system designed to work in real conditions. It is not about overcomplicating things, it is about using the right stages in the right order to get reliable, long term results.
3 Stage Whole House Chlorine and Scale Reduction System (Atlas Filtri)
Clean, better-tasting water for your entire home, with added protection against scale buildup.
This 3 stage filtration system is designed to remove sediment, reduce chlorine, and manage limescale, improving water quality throughout the house while also protecting your plumbing and appliances. It is a practical, high flow setup suited to mains water supplies, using proven Atlas Filtri components.
What’s Included
20” BIG 10 micron pleated sediment cartridge
20” BIG 5 micron carbon block cartridge
20” BIG ScaleArmour scale reduction cartridge
DP Trio moulded head and housing system
Pressure gauges to monitor filter condition
Protective cover
How It Works (Simple Explanation)
This system uses three stages of filtration, and each one has a job.
Stage 1 – 10 Micron Pleated Sediment Filter
This is your first line of defence. It removes fine particles such as dirt, rust, and organic debris like bark and leaves. This helps protect your plumbing, tapware, and appliances from wear and buildup.
Stage 2 – 5 Micron Carbon Block Filter
This stage reduces chlorine, improving the taste and smell of your water. It also provides a final level of fine filtration down to 5 microns, polishing the water before it enters your home.
Stage 3 – ScaleArmour Scale Reduction Cartridge
This stage is designed to manage limescale. It reduces scale formation by up to 86 percent, helping to prevent white staining, streaking on glass, and buildup inside pipes and appliances. This is especially useful in areas with harder water.
Performance
Rated flow 26.6 L/min
Estimated capacity 209,000 litres (90 percent chlorine reduction at 2 ppm)
Why Add Scale Reduction
Standard filtration improves water quality, but it does not address scale.
Scale can cause long term issues such as:
• White spotting on taps and shower screens
• Reduced efficiency in hot water systems
• Buildup inside pipes and appliances
By including a dedicated scale reduction stage, this system helps protect your entire home, not just improve water quality.
Running Costs (Realistic Expectations)
Cartridge replacement typically occurs every 6 to 12 months depending on water quality and maintenance.
Estimated cost of ownership
$71 per month
$859 per year
Breakdown:
10 micron pleated sediment cartridge
$137.50 per year
5 micron carbon block cartridge
$286 per year
ScaleArmour refill (polyphosphate media)
$435.60 per year
*Note on running costs
These figures are provided as a guide based on typical usage and maintenance. Actual replacement costs will vary depending on water quality, usage, and how well the system is maintained.
Replacement Cartridges
Replacement cartridges for this system are available in our store:
810982 – 10 micron pleated sediment cartridge
813173 – 5 micron carbon block cartridge
810718 – ScaleArmour refill (polyphosphate media)
Best For
Mains water homes
Reducing chlorine taste and smell
Managing scale and white staining
Protecting plumbing, appliances, and hot water systems
Whole house filtration setups
The Bottom Line
This system builds on a standard 3 stage setup by adding scale protection.
It is still a simple, reliable system, but with an extra layer of protection for your home. If you are dealing with hard water or want to reduce long term maintenance on appliances and fixtures, this is a strong step up from a standard chlorine removal system.
3 Stage Whole House PFAS Treatment System (Atlas Filtri)
Targeted filtration for PFAS, designed for real-world residential use.
This 3 stage filtration system is designed to remove sediment, reduce chlorine, and target PFAS compounds including PFOA and PFOS. It provides a high level of treatment for mains water supplies, using specialised PFAS ARMOR cartridges alongside standard pre-filtration to protect performance and extend filter life.
What’s Included
20” BIG 10 micron pleated sediment cartridge
2 x 20” BIG PFAS ARMOR cartridges (1 micron)
DP Trio moulded head and housing system
Maric valve (28 L/min flow control)
Protective cover
How It Works (Simple Explanation)
This system uses three stages of filtration, and each one has a job.
Stage 1 – 10 Micron Pleated Sediment Filter
This is your first line of defence. It removes sediment such as dirt, rust, and organic debris before it reaches the more specialised filters. This step is important because it protects the PFAS cartridges from clogging prematurely and helps maintain flow and performance.
Stage 2 – PFAS ARMOR Cartridge (1 micron)
This is where the primary treatment begins. This cartridge is designed to reduce PFAS compounds including PFOA and PFOS, often referred to as “forever chemicals”. It also reduces chlorine, taste, odour, and a range of other chemical contaminants.
Stage 3 – PFAS ARMOR Cartridge (1 micron)
The third stage mirrors the second, providing an additional level of treatment and contact time. This improves overall performance and ensures a higher level of PFAS reduction, particularly as cartridges begin to age over time.
Performance
Flow controlled via Maric valve at 28 L/min
Estimated capacity 113,400 litres per PFAS cartridge
Meets PFAS reduction criteria under NSF/ANSI 53 – 21 test protocol
Why PFAS Treatment Matters
PFAS are widely used in industrial and commercial applications due to their chemical stability and resistance to heat. Because of this, they do not break down easily and can persist in water supplies.
They are often referred to as “forever chemicals” and have been linked to environmental and health concerns.
A dedicated PFAS system is designed specifically to target these compounds, rather than relying on general filtration alone.
Running Costs (Realistic Expectations)
Cartridge replacement typically occurs every 6 to 12 months depending on water quality and usage.
Estimated cost of ownership
$126.08 per month
$1,512.50 per year
Breakdown:
10 micron pleated sediment cartridge
$137.50 per year
PFAS ARMOR cartridge (x2)
$1,375 per year
Note on running costs
These figures are provided as a guide based on typical usage and maintenance. Actual replacement costs will vary depending on water quality, usage, and how well the system is maintained.
Replacement Cartridges
Replacement cartridges for this system are available in our store:
810982 – 10 micron pleated sediment cartridge
811908 – PFAS ARMOR cartridge (1 micron)
Best For
Mains water homes
PFAS (PFOA and PFOS) treatment
Reducing chlorine, taste, and odour
Homes seeking higher level chemical filtration
Whole house filtration setups
The Bottom Line
This system is designed for situations where standard filtration is not enough.
By combining sediment pre-filtration with dual PFAS treatment stages, it provides a higher level of protection against persistent chemical contaminants. It is a specialised system, but still built on a simple and proven format that works in real residential conditions.
Our vision is to bring clarity and trust back to water filtration. We saw an industry where systems are often sold through pressure, fear, or confusion, with commission-based sales and overcomplicated setups being pushed where they are not needed. At the same time, many places selling filtration do not specialise in it, which can lead to inconsistent or misleading advice. We believe filtration should be simple, practical, and based on real-world understanding. Our focus is to provide honest advice and systems that do exactly what they are supposed to do, no more and no less.
Our vision
Contact Us
Interested in working together? Or do you need an over the phone discussion with a real water filtration expert? Fill out some info and we will be in touch shortly. We can’t wait to hear from you!